DLP25 specification chart showing below 1 μm 2σ repeatability, trigger forces, 5 m cable, SUS 316 housing and IP68 protection.
Qidu DLP25 wired CNC touch probe with cylindrical metal housing, cable fitting and coiled connection cable for workpiece measurement applications.
DLP25 mechanical drawing showing 26.4 mm body diameter, 20 mm upper diameter, M22 × 1.0 thread and 57.6 mm indicated body length.
DLP25 hard-wired CNC touch probe with silver stainless steel housing and coiled connection cable for CNC machine integration.
Qidu DLP25S wired CNC touch probe with stainless steel housing, illuminated red status indicator and ruby-tipped stylus.
  1. DLP25 specification chart showing below 1 μm 2σ repeatability, trigger forces, 5 m cable, SUS 316 housing and IP68 protection.
  2. Qidu DLP25 wired CNC touch probe with cylindrical metal housing, cable fitting and coiled connection cable for workpiece measurement applications.
  3. DLP25 mechanical drawing showing 26.4 mm body diameter, 20 mm upper diameter, M22 × 1.0 thread and 57.6 mm indicated body length.
  4. DLP25 hard-wired CNC touch probe with silver stainless steel housing and coiled connection cable for CNC machine integration.
  5. Qidu DLP25S wired CNC touch probe with stainless steel housing, illuminated red status indicator and ruby-tipped stylus.

DLP25 Hard-Wired CNC Touch Probe for Workpiece Setup

DLP25 hard-wired CNC touch probe supports workpiece setup and contact measurement through a 5 m oil-resistant cable. It features repeatability below 1 μm (2σ) under specified test conditions, an SUS 316 housing, IP68 sealing and ±X, ±Y, ±Z triggering.

التصنيف: الوسوم: , ,
شارك

DLP25 is a compact hard-wired CNC touch probe designed for workpiece setup, datum setting and contact measurement on CNC machine tools. Unlike optical or radio probing systems, its trigger signal is transmitted through a cable, making it suitable for installations where a wired connection can be routed safely and protected from machine movement.

The probe is specified with repeatability below 1 μm (2σ), measured using a 50 mm stylus at probing speeds of 50–200 mm/min. It supports ±X, ±Y and ±Z triggering, with an XY trigger force of 0.5–0.9 N and a Z trigger force of 6.2 N. The SUS 316 stainless steel housing and IP68 sealing are intended for demanding machine-tool environments.

The published configuration specifies a 5 m oil-resistant, four-core cable. The DLP25 is intended for integration with suitable probe inputs or interface hardware and controller macros, subject to machine-specific compatibility checks. Qidu provides installation and application support for selecting and implementing the system.

Model

DLP25
Product Type

Hard-Wired CNC Touch Probe
Repeatability

<1 μm (2σ)
Repeatability Test Conditions

50 mm stylus, 50–200 mm/min
Trigger Directions

±X, ±Y, ±Z
XY Trigger Force

0.5–0.9 N
Z Trigger Force

6.2 N
XY Overtravel

±12.5°
Z Overtravel

5.2 mm
Signal Transmission

Cable / Hard-Wired
Mechanical Trigger Life

>10 million cycles
Weight Without Shank

80 g
Cable Length

5 m
Cable Type

Oil-resistant, 4-core
Cable Diameter

5 mm
Housing Material

SUS 316 Stainless Steel
Protection Rating

IP68
Operating Temperature

0–60°C

منتجات ذات صلة