DTS100 Z-axis CNC contact tool setter with black housing, circular touch pad, coiled cable and flexible metal protective conduit.
Close-up of DTS100-style CNC contact tool setter showing the round metal measuring pad, black housing and flexible protected connection cable.
DTS100 dimensional drawing showing 48 mm body length, 43 mm overall height, 10 mm contact pad diameter and 4.2 mm mounting hole diameter.
Labeled DTS100 CNC tool setter diagram identifying the touch pad, air nozzle, signal light, pneumatic connection, mounting base and metal conduit.
DTS100 specification chart showing Z-axis triggering, below 1 μm repeatability, NC output, tungsten carbide pad, cable configuration and IP68 protection.
DTS200S Z-Axis Tool Setter Contact Pad Detail
  1. DTS100 Z-axis CNC contact tool setter with black housing, circular touch pad, coiled cable and flexible metal protective conduit.
  2. Close-up of DTS100-style CNC contact tool setter showing the round metal measuring pad, black housing and flexible protected connection cable.
  3. DTS100 dimensional drawing showing 48 mm body length, 43 mm overall height, 10 mm contact pad diameter and 4.2 mm mounting hole diameter.
  4. Labeled DTS100 CNC tool setter diagram identifying the touch pad, air nozzle, signal light, pneumatic connection, mounting base and metal conduit.
  5. DTS100 specification chart showing Z-axis triggering, below 1 μm repeatability, NC output, tungsten carbide pad, cable configuration and IP68 protection.
  6. DTS200S Z-Axis Tool Setter Contact Pad Detail

DTS100 Z-Axis CNC Tool Setter for Tool Length Measurement

DTS100 Z-axis contact tool setter supports automatic tool length measurement and tool breakage checks using compatible CNC cycles. It features <1 μm (2σ) repeatability at 50 mm/min, a Ø10 mm tungsten carbide pad, normally closed output, IP68 protection and a 5 m cable.

Categoria: Etiquetas: , ,
Partilhe o seu amor

DTS100 is a compact Z-axis contact tool setter designed for automatic tool length measurement and tool offset setting on CNC machining centers. A cutting tool approaches the tungsten carbide touch pad along the +Z triggering direction, and the unit sends a contact signal to a compatible CNC input through its wired connection.

The DTS100 provides specified repeatability below 1 μm (2σ) at a probing speed of 50 mm/min. Its Ø10 mm contact pad, normally closed (NC) electrical output and 5 m oil-resistant six-core cable support integration into suitable machine setups. IP68 sealing and a protective cable conduit are intended for industrial machining environments.

With appropriate CNC measurement macros, the tool setter can also support tool length verification and basic tool breakage checks. Qidu provides technical assistance for machine compatibility, mounting location, wiring, calibration and measurement cycle configuration. Confirm available clearances, controller signal requirements and the required installation accessories before ordering.

Model

DTS100
Product Type

Z-Axis Contact CNC Tool Setter
Contact Pad Diameter

Ø10 mm
Trigger Direction

+Z
Repeatability

<1 μm (2σ)
Repeatability Test Speed

50 mm/min
Pre-Stroke

0.5 mm
Z-Axis Stroke

6.0 mm
Trigger Protection Distance

3.5 mm
Trigger Force

1.8 N (vertical installation)
Output Configuration

Normally Closed (NC)
Signal Transmission

Hard-Wired Cable
Contact Rating

DC 24 V, ≤20 mA, resistive load
Recommended Contact Current

10 mA
Mechanical Trigger Life

>10 million cycles
Touch Pad Material

Tungsten Carbide
Cable Length

5 m
Cable Type

Oil-Resistant, 6-Core
Cable Outer Diameter

Ø4.8 mm
Protective Conduit Length

2 m
LED Status

Normal: ON; Activated: OFF
Protection Rating

IP68
SpecificationDTS200CDTS200DTS100
Contact Pad DiameterØ20 mmØ20 mmØ10 mm
Trigger Direction+Z+Z+Z
Repeatability<1 μm (2σ)<1 μm (2σ)<1 μm (2σ)
Test Speed50 mm/min50 mm/min50 mm/min
Pre-Stroke0.7 mm0.7 mm0.5 mm
Z-Axis Stroke8.5 mm11 mm6 mm
Trigger Protection Distance5.5 mm5.5 mm3.5 mm
Trigger Force2.2 N2.2 N1.8 N
Electrical OutputNONONC
Overall Height Shown83.9 mm110.0 mm43.0 mm
Housing / MountingCylindrical / Round BaseRectangularRectangular
Protection RatingIP68IP68IP68

Produtos Relacionados