Qidu DRP40-P2 wireless CNC touch probe with silver housing, ceramic stylus and ruby ball tip.
Qidu DRP40-P2 radio CNC touch probe shown beside its dedicated black receiver with signal status indicators.
DRP40-P2 technical drawing showing the 40 mm probe body diameter and 86 mm radio receiver diameter.
DRP40-P2 radio CNC touch probe with black signal receiver and coiled connection cable for CNC machine integration.
Front view of the Qidu DRP40-C wireless CNC touch probe, showing its cylindrical body, mounting interface and contact measurement stylus.
  1. Qidu DRP40-P2 wireless CNC touch probe with silver housing, ceramic stylus and ruby ball tip.
  2. Qidu DRP40-P2 radio CNC touch probe shown beside its dedicated black receiver with signal status indicators.
  3. DRP40-P2 technical drawing showing the 40 mm probe body diameter and 86 mm radio receiver diameter.
  4. DRP40-P2 radio CNC touch probe with black signal receiver and coiled connection cable for CNC machine integration.
  5. Front view of the Qidu DRP40-C wireless CNC touch probe, showing its cylindrical body, mounting interface and contact measurement stylus.

DRP40-P2 2.4 GHz Radio CNC Touch Probe with Receiver

DRP40-P2 radio CNC touch probe uses 2.4 GHz frequency hopping and a dedicated receiver for on-machine workpiece measurement. It offers a 15 m operating range, IP68 protection and repeatability below 1 μm under specified test conditions.

Catégorie : Étiquettes : , ,
Partagez votre amour

DRP40-P2 is a radio transmission CNC touch probe developed for automated workpiece setup and on-machine measurement in CNC machining centers. It communicates with a dedicated receiver over a 2.4 GHz radio link, helping reduce the positioning constraints associated with optical line-of-sight transmission.

The system uses smart frequency hopping across 83 frequency channels and provides a specified operating range of 15 m. M-code activation supports integration into programmed probing sequences when the machine controller, receiver connections and measurement macros are correctly configured.

With repeatability specified below 1 μm using a 50 mm stylus at a probing speed of 50–200 mm/min, the DRP40-P2 supports consistent contact measurements under defined conditions. Its IP68-rated sealing, 40 mm probe body diameter and battery-powered design suit use in CNC machining environments.

Typical applications include workpiece datum setting, part positioning and dimensional checks. Qidu provides technical guidance for system selection, installation, controller integration and troubleshooting.

Model

DRP40-P2
Probe Type

Radio CNC Touch Probe
Repeatability

<1 μm
Test Conditions

50 mm stylus, 50–200 mm/min
Trigger Directions

±X, ±Y, +Z
XY Trigger Force

0.5–0.9 N
Z Trigger Force

6.2 N
XY Overtravel

±12.5°
Z Overtravel

6.2 mm
Transmission Method

Radio
Radio Frequency

2.4 GHz
Frequency Channels

83
Channel Switching

Smart Frequency Hopping
Operating Range

15 m
Transmission Envelope

360°
Activation Method

M-Code
Trigger Life

>10 million cycles
Probe Body Diameter

40 mm
Receiver Diameter

86 mm
Weight Without Shank

220 g
Battery Type

2 × 14250 lithium batteries
Standby Battery Life

300 days
Battery Life at 3,000 Triggers/Day

260 days
Battery Life at 8,000 Triggers/Day

200 days
Battery Life at 15,000 Triggers/Day

175 days
Protection Rating

IP68
Operating Temperature

0–60°C

Produits similaires