Qidu DTS100S contact CNC tool setter with tungsten carbide measuring pad, flexible bellows cover, black mounting base and cable connector.
DTS100S Z-axis contact CNC tool setter with bellows-style sensing cover, black housing, coiled cable and flexible metal protective conduit.
DTS100S dimensional drawing showing 50 mm body length, 47 mm overall height, 10 mm contact pad diameter and 4.1 mm mounting hole diameter.
DTS100S specification chart showing below 1 μm 2σ repeatability, NC output, 6 mm stroke, tungsten carbide contact pad and IP68 protection.
DTS200S Z-Axis Tool Setter Contact Pad Detail
  1. Qidu DTS100S contact CNC tool setter with tungsten carbide measuring pad, flexible bellows cover, black mounting base and cable connector.
  2. DTS100S Z-axis contact CNC tool setter with bellows-style sensing cover, black housing, coiled cable and flexible metal protective conduit.
  3. DTS100S dimensional drawing showing 50 mm body length, 47 mm overall height, 10 mm contact pad diameter and 4.1 mm mounting hole diameter.
  4. DTS100S specification chart showing below 1 μm 2σ repeatability, NC output, 6 mm stroke, tungsten carbide contact pad and IP68 protection.
  5. DTS200S Z-Axis Tool Setter Contact Pad Detail

DTS100S Z-Axis Contact CNC Tool Setter for Tool Length

DTS100S Z-axis contact tool setter supports automatic tool length measurement and tool breakage checks through compatible CNC cycles. It features <1 μm (2σ) repeatability at 50 mm/min, a Ø10 mm tungsten carbide contact pad, NC output, IP68 protection and a 5 m oil-resistant cable.

Categoría: Etiquetas: , ,
Comparte tu aprecio

DTS100S is a compact Z-axis contact tool setter for automated tool length measurement, offset setting and tool checks on CNC machining centers. Mounted at a fixed position, its tungsten carbide contact pad detects a cutting tool approaching in the +Z triggering direction and sends a signal to a compatible CNC control input.

The DTS100S has specified repeatability below 1 μm (2σ) at a probing speed of 50 mm/min. It uses a normally closed (NC) output and a 5 m oil-resistant, six-core cable. Its Ø10 mm contact pad, IP68 sealing and flexible protective conduit suit appropriately configured machining environments. The illustrated model also features a bellows-style cover around the sensing element.

With suitable measurement macros, the DTS100S can support programmed tool length setting, offset verification and basic tool breakage checks. Qidu provides assistance with product selection, wiring, mounting, calibration and controller integration. Confirm available machine clearance and connection requirements before ordering.

Model

DTS100S
Product Type

Z-Axis Contact CNC Tool Setter
Contact Pad Diameter

Ø10 mm
Trigger Direction

+Z
Repeatability

<1 μm (2σ)
Repeatability Test Speed

50 mm/min
Pre-Stroke

0.5 mm
Z-Axis Stroke

6.0 mm
Trigger Protection Distance

3.5 mm
Trigger Force

1.8 N (vertical installation)
Output Configuration

A: Normally Closed (NC)
Signal Transmission

Hard-Wired Cable
Mechanical Trigger Life

>10 million cycles
Cable Length

5 m
Cable Type

Oil-Resistant, 6-Core
Cable Outer Diameter

Ø4.8 mm
Touch Pad Material

Tungsten Carbide
Electrical Contact Rating

DC 24 V, ≤20 mA, resistive load
Recommended Contact Current

10 mA
Protective Conduit Length

2 m
LED Status

Normal: ON; Activated: OFF
Protection Rating

IP68
SpecificationDTS200CDTS200DTS100
Contact Pad DiameterØ20 mmØ20 mmØ10 mm
Trigger Direction+Z+Z+Z
Repeatability<1 μm (2σ)<1 μm (2σ)<1 μm (2σ)
Test Speed50 mm/min50 mm/min50 mm/min
Pre-Stroke0.7 mm0.7 mm0.5 mm
Z-Axis Stroke8.5 mm11 mm6 mm
Trigger Protection Distance5.5 mm5.5 mm3.5 mm
Trigger Force2.2 N2.2 N1.8 N
Electrical OutputNONONC
Overall Height Shown83.9 mm110.0 mm43.0 mm
Housing / MountingCylindrical / Round BaseRectangularRectangular
Protection RatingIP68IP68IP68

Productos relacionados