DMTS-R technical drawing showing the 65 mm mounting base width, 106.9 mm overall length, 101.1 mm height and 12.7 mm contact pad diameter.
DMTS-R specification chart showing 2.4 GHz radio transmission, three-axis triggering, below 1 μm repeatability, battery life and IP68 protection.
Qidu 3D radio CNC tool setter with silver housing, black contact pad, sensing assembly and mounting base for CNC tool measurement.
  1. DMTS-R technical drawing showing the 65 mm mounting base width, 106.9 mm overall length, 101.1 mm height and 12.7 mm contact pad diameter.
  2. DMTS-R specification chart showing 2.4 GHz radio transmission, three-axis triggering, below 1 μm repeatability, battery life and IP68 protection.
  3. Qidu 3D radio CNC tool setter with silver housing, black contact pad, sensing assembly and mounting base for CNC tool measurement.

DMTS-R 3D Radio CNC Tool Setter for Tool Length and Diameter

DMTS-R 3D radio CNC tool setter enables contact-based tool length and diameter measurement via ±X, ±Y and +Z triggering. It features 2.4 GHz radio transmission with smart frequency hopping, repeatability below 1 μm (2σ) at 30 mm/min and IP68 protection.

Категория: Метки: , ,
Поделитесь с друзьями

DMTS-R is a 3D radio CNC tool setter designed for automatic tool length and diameter measurement on CNC machining centers. It detects tool contact in the ±X, ±Y and +Z directions, enabling compatible CNC measurement cycles to establish tool offsets and perform dimensional checks.

The DMTS-R sends trigger signals using 2.4 GHz radio transmission with smart frequency hopping, avoiding the need for a signal cable connected directly to the tool setter. A 360° transmission envelope and M-code activation support integration with a suitable radio receiver and CNC controller interface.

Specified repeatability is below 1 μm (2σ) at a measuring speed of 30 mm/min. Additional features include a carbide contact pad, IP68 protection, two 14250 lithium batteries and a mechanical trigger life exceeding 10 million cycles.

Qidu provides application assessment, installation guidance and CNC integration support. Receiver compatibility, machine clearance, measurement macros and activation settings should be confirmed before installation.

Model

DMTS-R
Product Type

3D Radio CNC Tool Setter
Repeatability

<1 μm (2σ)
Repeatability Test Speed

30 mm/min
Trigger Directions

±X, ±Y, +Z
Pre-Stroke

None (as specified)
XY Stroke

6 mm
Z-Axis Stroke

5.1 mm
Trigger Force

1.1–2.2 N (direction-dependent)
Mechanical Trigger Life

>10 million cycles
Signal Transmission

Radio
Radio Frequency

2.4 GHz
Channel Switching

Smart Frequency Hopping
Transmission Envelope

360°
Activation Method

M-Code
Contact Pad Material

Carbide
Contact Pad Diameter

Ø12.7 mm
Battery Type

2 × 14250 Lithium Batteries
Standby Battery Life

>300 days
Battery Life at 3,000 Triggers/Day

>260 days
Battery Life at 8,000 Triggers/Day

>200 days
Battery Life at 15,000 Triggers/Day

>175 days
Protection Rating

IP68
Operating Temperature

0–60°C
SpecificationDTS200CDTS200DTS100
Contact Pad DiameterØ20 mmØ20 mmØ10 mm
Trigger Direction+Z+Z+Z
Repeatability<1 μm (2σ)<1 μm (2σ)<1 μm (2σ)
Test Speed50 mm/min50 mm/min50 mm/min
Pre-Stroke0.7 mm0.7 mm0.5 mm
Z-Axis Stroke8.5 mm11 mm6 mm
Trigger Protection Distance5.5 mm5.5 mm3.5 mm
Trigger Force2.2 N2.2 N1.8 N
Electrical OutputNONONC
Overall Height Shown83.9 mm110.0 mm43.0 mm
Housing / MountingCylindrical / Round BaseRectangularRectangular
Protection RatingIP68IP68IP68

Похожие